Recently, we’ve received several messages, and another blogger has mentioned the use of game cameras – also referred to as
trail cams ( for example:
MOULTRIE PANORAMIC 180I ), or camera traps – as aids in searching for Ivory-billed Woodpeckers. We’ve been deploying trail cams since early 2009, and have had some intriguing “hits”. They have been useful in many ways, and we have learned a lot about the feeding habits of other woodpeckers – specifically, Pileated, Hairy, and Red-bellied – that were useful in giving Mark insights into the type of feeding sign that we have come to believe is most likely diagnostic for ivorybills. In dozens of deployments, and hundreds of hours of searching with boots on the ground, and sometimes in the water, we have NEVER observed a woodpecker performing the type of scaling that we have come to suspect is diagnostic.
While trail cams are a valuable tool in our arsenal, they are, by no means infallible. There are many pitfalls involved in their use. Firstly, they are not designed to capture birds – in fact many common species of birds are almost unidentifiable in the images. Birds do not set off the motion triggers that these cameras use, and why should they? The cameras are designed for use along trails and adjacent to food plots used by larger mammals – usually whitetail deer. I have tested the Reconyx “Hyperfire” cameras that we use, and even a large
Wild Turkey at fairly close range will not trigger one, even at its most sensitive setting, while a relatively small (terrier size) dog will trigger one from a distance of twenty-five or more yards. The manufacturer has indicated to me that there is “something about the way birds reflect light in the visible and infrared spectrum” that makes the cameras’ triggering units unable to “see” them.
As a result, ivorybill hunters must find a camera that will operate in time lapse mode. For all their disadvantages (3.1
megapixels, low resolution among them) the Reconyx cameras offer the best time lapse mode available at an affordable price. This, in and of itself, though, becomes a handicap, as the card for each camera must be programmed, using a proprietary program provided by Reconyx, on a PC. One programs the card, inserts it into the camera, and hopes for the best – there is no way to check and see if the card/camera combination is functioning properly. This has led to many wasted deployments. Additionally, there is the problem of how often should the camera take a photo vs. storage capacity of the card. The cams are designed for 8 gig cards, sometimes they will function with a 16 gig card, but will universally malfunction with a 32 gig card. 8 gigs is usually enough for a ten-day deployment with the
camera time constrained to take a photo every twenty seconds for ten hours a day – you do get to select the hours of operation though. While every twenty seconds would seem to be quite often (and a full 8 gig card will store upwards of thirty
thousand images), perform a little test for yourself. Go out to your favorite birdwatching location and see how long a bird – any arboreal non-raptor species – stays in one location for twenty or more seconds. Captures of birds on game cams are a relatively rare event – I have looked at nearly a million Reconyx photographs and have picked up birds of any kind in perhaps a thousand images – identifiable birds in maybe two hundred.
The very first thing that has to be done when using
game cams is to select a location where you suspect an ivorybill is likely to show up. This could be a tree with scaled bark and other indications that an ivorybill has visited it, or a cavity with features that seem to match photographs of known ivorybill cavities. Both of these are, at best, iffy propositions. One has to find the tree, geotag it (you do have a good GPS unit, right?) then return to the location – often several miles of hiking through some pretty rough and secluded forest, carrying the camera and its mounting system – which weighs around ten pounds. Then the
camera and mount have to be positioned to get the target near the center of the frame, which gets easier with practice, and the camera and mount hidden and intervening vegetation trimmed so as not to interfere with the line-of-sight. Once all this has been done the camera can be turned on, armed, and left to do its thing.
Assuming that everything up to this point has been done perfectly, in ten days or so, it’s time to change cards, or retrieve the cam. Now one is faced with the daunting prospect of going through some thirty-thousand photos looking for anything “
interesting”. Often, several days of images will pass without a single “hit” of any kind. It’s often a relief to spot even a small woodpecker or squirrel, to remind one that the target is part of a living ecosystem.
The series shown here is exceptional in terms of quantity of images, quality, and our ability to place the camera. (It may be significant for what it doesn’t show, a Pileated doing the type of scaling we think is diagnostic.) Even so, it was not possible to cover the entire target tree.
As I stated earlier, these cameras, within their limitations, are useful tools, but for my money, nothing really beats the good old MK I MOD I human eyeball. But at this point, that’s just not enough …
In addition to the suggestive photos we’ve already posted, we recently obtained some pictures at the site where last week’s double knock was recorded. Because we find some of these pictures intriguing but inconclusive, we have deployed two cameras in hopes that the double placement will yield an identifiable photograph. The first picture, taken under good lighting conditions, clearly shows a Red-headed Woodpecker (there is a roost at the very top of the snag); the others are ambiguous. We are posting them unedited and leave it to you to speculate about what they may be. We recognize that none of these are of anywhere near good enough quality to be identifiable as ivorybills, but we are doing some further analysis to get a clearer sense of scale. The camera placement is 85’ from the tree; the branches behind the tree are an additional 15” away. My preliminary estimate of the diameter of the tree just above the jug handle on the right is approximately 18”.
I have taken careful measurements using a camera with known lens settings and a rangefinder – when the weather is more congenial, I will make comparison shots at the exact measured ranges. This should give a margin of error of ~1″ or less.
